Most versatile. Good strength, excellent machinability and corrosion resistance. General-purpose structural parts.
CNC Machining Materials We Work With
A comprehensive guide to the metals, plastics and specialty alloys we machine. Compare properties, grades and applications to select the right material for your project.
MATERIAL CATEGORIES
8 Material Families, 70+ Grades
From common aluminum and steel to titanium, superalloys and engineering plastics — we support a wide range of materials for precision CNC, Swiss turning and gear manufacturing.
MATERIAL DETAILS
Detailed Material Guides
Click a tab below to view detailed grade information, properties and typical applications.
Aluminum Parts Sample — Anodized Components
Aluminum Alloys
Aluminum is one of the most widely used materials in CNC machining — valued for its excellent strength-to-weight ratio, corrosion resistance and natural finish. It machines quickly and takes well to anodizing, making it a popular choice for everything from consumer electronics to aerospace components.
Aluminum grades are classified by series (6000-series for structural, 7000-series for high strength). The 6061-T6 is our most commonly machined aluminum grade — a versatile workhorse for general-purpose precision parts.
Common Grades We Machine
Excellent for anodizing and extrusion. Commonly used for architectural and decorative components.
High-strength aerospace grade. Strongest aluminum alloy. Used for high-stress structural components.
High strength with good fatigue resistance. Aerospace and high-performance applications.
Excellent corrosion resistance, especially in marine environments. Good formability.
European standard structural aluminum. Similar to 6061 with slightly higher strength.
Typical Applications
Electronic enclosuresAutomotive componentsAerospace structuresConsumer productsMedical devicesRobotic partsHeat sinksBrackets & mounts
Stainless Steel Parts Sample — Polished & Passivated
Stainless Steel
Stainless steel is prized for its corrosion resistance, mechanical strength and clean appearance. It's the go-to material for medical, food processing, marine and outdoor applications where rust resistance is critical.
We regularly machine austenitic grades (303, 304, 316) for general corrosion resistance, ferritic grades (430) for magnetic applications, and precipitation-hardened grades (17-4 PH) for high-strength components. 303 is our most machinable stainless grade, while 316L is preferred for medical and high-corrosion environments.
Common Grades We Machine
Most machinable austenitic stainless. Free-machining with sulfur addition. Ideal for high-volume turned parts.
Classic 18/8 stainless. Good corrosion resistance and formability. Most widely used general-grade stainless.
Low-carbon version of 304. Better weldability and resistance to intergranular corrosion.
Premium corrosion resistance with molybdenum addition. Medical, marine and chemical processing standard.
Free-machining martensitic stainless. Good strength and hardness. Magnetic.
Ferritic stainless. Magnetic, good corrosion resistance for general use. Lower cost alternative to 304.
Precipitation-hardened stainless. High strength (up to 1100 MPa) with good corrosion resistance.
Similar to 17-4 PH with improved transverse properties. Better toughness in thicker sections.
Additional grades available on request. Let us know your specific requirements.
Typical Applications
Medical instrumentsFood processing equipmentMarine componentsSensors & probesValves & fittingsAutomotive partsOutdoor equipmentChemical processing
Carbon & Alloy Steel Parts — Shafts, Gears & Fasteners
Carbon & Alloy Steel
Carbon and alloy steels are the workhorses of industrial manufacturing — valued for their strength, hardness, toughness and cost-effectiveness. From simple 1018 brackets to heat-treated 4140 shafts, these materials form the backbone of mechanical engineering.
Low-carbon steels (1018, 1020) are easy to machine and weld. Medium-carbon steels (1045, 4140) respond well to heat treatment for high strength and hardness. Free-machining grades (12L14, 1215) are optimized for high-volume automatic lathe and Swiss turning production.
Common Grades We Machine
Low-carbon, easy to machine and weld. Good for general-purpose brackets, fixtures and low-stress parts.
Medium-carbon steel. Heat-treatable to high hardness. Widely used for shafts, gears and axles.
Chrome-moly alloy steel. Excellent strength and toughness after quenching & tempering. High-stress shafts, bolts, gears.
Chromium-molybdenum steel. Good weldability and strength. Aerospace, automotive and bicycle components.
Nickel-chromium-molybdenum steel. Ultra-high strength after heat treatment. Critical aerospace and defense components.
Free-machining steel with lead. Excellent for high-volume Swiss turning and automatic lathe production.
Lead-free free-machining steel. RoHS compliant alternative to 12L14. Good surface finish and machinability.
Mild structural steel. Common for welded structures, plate work and general fabrication.
Additional carbon and alloy steel grades available. Spring steel and Grade 8.8/10.9/12.9 fastener steel also supported.
Typical Applications
Shafts & axlesGears & pinionsFasteners & boltsIndustrial machineryAutomotive componentsTool holdersHydraulic partsStructural brackets
Tool & Mold Steel Parts — Dies, Punches & Wear Components
Tool & Mold Steel
Tool steels are specifically formulated for hardness, wear resistance and toughness — making them ideal for cutting tools, dies, molds and high-wear components. Each grade is designed for specific working conditions, from cold forming to high-temperature hot work.
We machine tool steels in both pre-hardened and annealed conditions. D2 and A2 are our most commonly requested cold-work tool steels for punches, dies and shear blades. H13 is the standard for hot work and die casting applications, while P20 is widely used for plastic injection molds.
Common Grades We Machine
High-carbon, high-chromium cold-work tool steel. Excellent wear resistance and abrasion resistance. Punches, dies, shear blades.
Air-hardening cold-work tool steel. Good balance of toughness and wear resistance. Less distortion than D2 during hardening.
Oil-hardening cold-work tool steel. Good machinability in annealed state. General-purpose tool steel for knives and tools.
Hot-work tool steel. Excellent high-temperature strength and toughness. Die casting, extrusion dies, forging tools.
Molybdenum-type high-speed steel. Excellent red hardness and wear resistance. Cutting tools, drills, end mills.
Pre-hardened plastic mold steel. Good machinability and polishability. Plastic injection molds and die holders.
Alloy tool steel. Good hardenability and wear resistance. Measuring tools, gauges and cold forming dies.
Typical Applications
Cutting toolsPunches & diesPlastic injection moldsDie casting toolsGauges & fixturesBushings & wear partsShear bladesForming rolls
Copper & Brass Parts — Connectors, Pins & Terminals
Copper & Copper Alloys
Copper and its alloys are valued for excellent electrical and thermal conductivity, corrosion resistance and decorative appearance. Brass is the most commonly machined copper alloy — it's free-cutting, produces excellent surface finish and takes well to plating.
We machine a full range of copper alloys: free-cutting brass for high-volume connectors and terminals, phosphor bronze for springs and electrical contacts, beryllium copper for high-strength spring components, and pure copper for thermal and electrical applications.
Common Grades We Machine
Free-cutting brass. Excellent machinability and surface finish. High-volume connectors, terminals and turned parts.
Chinese standard brass grades. Good strength and corrosion resistance. General-purpose brass components.
Pure copper. Excellent electrical and thermal conductivity. Electrical contacts, heat sinks and busbars.
High strength, elasticity and fatigue resistance. Spring contacts, electrical connectors and bearing surfaces.
Highest strength copper alloy. Excellent spring properties and corrosion resistance. High-performance springs and contacts.
Tin bronze. Good wear resistance and hardness. Bearings, gears and bushings.
Copper-nickel alloy. Excellent corrosion resistance in seawater. Marine and offshore applications.
Copper-nickel-zinc alloy. Silver-like appearance, good corrosion resistance. Decorative and electronic components.
European standard 63/37 brass. Good formability and machinability. General-purpose brass parts.
Typical Applications
Connector pinsElectrical terminalsValves & fittingsSprings & contactsHeat exchangersBearings & bushingsDecorative partsPlumbing components
Titanium Parts — Medical & Aerospace Components
Titanium Alloys
Titanium offers an exceptional combination of high strength, low density and excellent corrosion resistance — making it the material of choice for aerospace, medical implants and high-performance applications where weight savings matter.
Grade 2 is commercially pure titanium — highly corrosion resistant and formable, commonly used for chemical processing and marine components. Grade 5 (Ti-6Al-4V) is the workhorse titanium alloy — heat treatable to high strength, used for structural aerospace components and medical implants.
Common Grades We Machine
Commercially pure titanium. Excellent corrosion resistance and formability. Chemical processing, marine, medical components.
Alpha-beta titanium alloy. Most widely used titanium grade. High strength, heat treatable. Aerospace structures and medical implants.
Typical Applications
Aerospace componentsMedical implantsSurgical instrumentsAutomotive (racing)Marine hardwareChemical processingBicycle partsHigh-performance sports
Superalloy Parts — High-Temperature & Corrosion Resistant
Superalloys (High-Temperature Alloys)
Superalloys are designed to operate under extreme mechanical stress and high temperature environments — often in corrosive conditions. They're critical for aerospace turbine components, chemical processing equipment and oil & gas applications.
Inconel 625 and 718 are the most commonly requested nickel-based superalloys. Inconel 718 is precipitation-hardenable and retains high strength at elevated temperatures (up to 700°C), making it the standard for jet engine components. Hastelloy offers exceptional corrosion resistance for harsh chemical environments.
Common Grades We Machine
Nickel-chromium-molybdenum alloy. Excellent corrosion resistance and high-temperature strength. Chemical processing, marine, aerospace.
Precipitation-hardenable nickel alloy. High strength up to 700°C. Jet engine components, turbine discs, rocket motors.
Nickel-molybdenum-chromium alloy. Superior corrosion resistance in strongly oxidizing and reducing environments.
Nickel-copper alloy. Excellent resistance to seawater and acidic environments. Marine and chemical processing equipment.
Typical Applications
Aerospace turbineChemical processingOil & gas (downhole)Marine equipmentNuclear componentsHeat exchangersValve componentsRocket motor parts
Engineering Plastic Parts — POM, PEEK, Nylon & More
Engineering Plastics
Engineering plastics offer unique advantages for precision components: lightweight, excellent electrical insulation, natural corrosion resistance and self-lubricating properties. They're ideal for applications where metal would be too heavy, too conductive or require additional surface treatment.
We machine both general-purpose engineering plastics (ABS, PC, acrylic) and high-performance grades (PEEK, POM/Delrin, Nylon). POM is our most commonly machined plastic for precision components — it's dimensionally stable, has good wear resistance and machines to a smooth finish. PEEK is the premium choice for high-temperature and medical applications.
General-Purpose Engineering Plastics
Tough, impact-resistant plastic. Good machinability and low cost. Enclosures, housings, structural components.
Transparent, extremely impact resistant. Safety glazing, lenses, protective covers.
Excellent optical clarity. Polishes to a glass-like finish. Lenses, light guides, decorative parts.
Rigid, chemical resistant, low cost. Plumbing components, electrical insulation, fluid handling.
High-density polyethylene. Excellent chemical resistance and low friction. Fluid handling, wear components.
Ultra-high molecular weight PE. Extremely low friction and wear resistance. Bearings, bushings, wear strips.
High-Performance Engineering Plastics
Acetal copolymer. Excellent dimensional stability, good wear resistance. Our most machined plastic for precision parts.
Good strength, wear resistance and damping. Gears, bearings, structural components. Can be glass-filled for higher strength.
Highest-performance engineering plastic. 250°C continuous use, chemical resistant, biocompatible. Medical and aerospace.
Lowest friction of any solid material. Excellent chemical resistance. Non-stick and high-temperature applications.
Strong, stiff, dimensionally stable. Good electrical properties. Electrical and electronic components.
Typical Applications
Gears & pulleysBearings & bushingsElectrical insulatorsMedical devicesFood processingFluid handlingConsumer productsAerospace interiors
SELECTION GUIDE
How to Choose the Right Material
Not sure which material fits your application? Here are the key factors our engineers evaluate when recommending a material.
1. Mechanical Requirements
What loads and stresses will the part see? Tensile strength, yield strength, hardness, impact resistance and fatigue life all influence material choice.
2. Environmental Conditions
Will the part be exposed to moisture, salt, chemicals or extreme temperatures? Corrosion resistance and temperature ratings narrow down the options quickly.
3. Weight Constraints
For weight-sensitive applications (aerospace, robotics, handheld devices), aluminum, titanium or engineering plastics may be preferred over steel.
4. Surface & Finish
What surface treatment is needed? Anodizing works best on aluminum, plating on steel and brass. Some materials respond better to specific finishes than others.
5. Volume & Cost
Material cost varies significantly. For high-volume production, choosing a more machinable grade (like 303 stainless vs. 304) can reduce per-part cost substantially.
6. Regulatory & Compliance
Medical parts may require biocompatible materials. Food equipment needs food-safe grades. RoHS compliance restricts certain free-machining alloys containing lead.
QUALITY & TRACEABILITY
Material Certification & Traceability
Every batch of material is verified and traceable. We provide the documentation you need for quality records and regulatory compliance.
Material Test Certificates (MTC)
We provide material test certificates for every order, confirming material grade, chemical composition and mechanical properties per the mill certificate.
Full Batch Traceability
Each production batch is linked to its material heat/lot number. We track material from incoming inspection through final inspection and delivery.
RoHS & REACH Compliant
Standard materials and finishes are RoHS and REACH compliant. We can confirm specific compliance requirements on request.
Third-Party Testing Available
We can coordinate independent material testing — hardness testing, tensile testing, salt spray testing and more — through certified labs.
READY TO START?
Not Sure Which Material to Use?
Send us your drawing and application requirements. Our engineering team will review manufacturability and recommend the best material for your project.