Manufacturing Capabilities for Precision Components
Integrated turning, milling, gear manufacturing, secondary operations and inspection support your project from prototype validation to repeat production.
- Swiss-type turning for slender, multi-feature parts
- CNC milling, turning and gear routes in one program
- Secondary ops, finishing and inspection aligned to drawing
Core capabilities
Process selection guide
Match the part geometry and feature set to a starting process route. Engineering still confirms the final path from your drawing.
If your part is…
Start here
Slender / multi-feature small diameter
Larger round work or non-Swiss fit
Multi-face / pockets / structural
Tooth forms / transmission
Knurl / tap / deburr / cleaning
Plating / anodizing / heat treatment
Related product families
Match the capability above to a part family, then open the catalog and send a drawing.
Swiss Turned Components
Shafts & pins, fittings, bushings and custom small parts.
Browse family
Custom CNC Machined Parts
Turned, milled, turn-mill and sheet-metal support parts.
Browse family
Precision Gears
Spur, helical, worm, plastic and custom gears to drawing.
Browse family
Custom Fasteners
Special screws, studs and precision threaded fasteners.
Browse familyProduction flow
A practical route from drawing intake to ship-ready release. Exact steps follow the part and inspection plan.
- 01 Drawing review Feasibility and process route
- 02 Material Grade and stock readiness
- 03 Machining Swiss, CNC or gear route
- 04 Secondary Tap, knurl, deburr as needed
- 05 Inspection Dimensional release checks
- 06 Pack & delivery Protected, ship-ready
Equipment gallery
Swiss-type turning
CNC milling
Gear manufacturing
Turn-mill
Inspection
Workshop
NEXT STEP
Send drawings for a capability-fit review
Share drawings, material, quantity and inspection needs. We confirm the process route and reply with clear next steps.
CAPABILITY OVERVIEW
Manufacturing Capabilities Overview
Core machining, specialized manufacturing, post-machining and quality control — all under one quality system, supporting your project from prototype to repeat production.
Core process for complex small and slender parts. Bar diameters Ø3–32 mm.
View Capability →
Flexible turning for larger diameters outside Swiss preference. Ø10–200 mm.
View Capability →
3-, 4- and 5-axis milling for multi-face contours, pockets and structural features.
View Capability →
Combined turning and milling in single setup for complex multi-feature parts.
View Capability →
Specialized Manufacturing
Custom gears — spur, helical, worm and plastic — manufactured to drawing.
View Capability →
High-volume production of small turned parts with stable cycle times.
View Capability →
Laser cutting, bending and punching for brackets, covers and enclosures.
View Capability →
Drilling, tapping, knurling, deburr, cleaning and surface finishing.
View Capability →
Plating, anodizing, heat treatment, polishing and coating per drawing.
View Capability →
IQC, FAI, IPQC, final inspection and release documentation.
View Capability →
CMM, optical measurement, micrometers, thread gauges and roughness testing.
View Capability →
ISO 9001:2015, ISO 14001:2015, RoHS compliant — audit-ready references.
View Capability →
Match Your Part to the Right Process
Engineering confirms the final path from your drawing — but this guide gives a starting reference.
Combined turning + milling features CNC Turn-Mill
High-volume small turned parts Automatic Lathe
Brackets / covers / enclosures Sheet Metal Fabrication
Match Capability to Part Family
CORE LINE
From Drawing to Delivery
Feasibility and process route assessment
Material and tolerance verification
Inspection requirements confirmed
Grade and stock readiness confirmed
Material certificates on file
Bar stock or blank preparation
Swiss, CNC or gear route selected
First article verification
In-process dimensional control
Surface finish per drawing
Heat treatment when specified
CMM and optical measurement
Critical feature verification
Protected, ship-ready packaging
Lot identification and labeling
Document pack before dispatch
Stable setups for ongoing lots
Process control documentation
Release records maintained
Engineering Support
Drawing clarification response
Manufacturability feedback
Process improvement suggestions
Core equipment supporting Swiss-type turning, CNC milling, CNC turning and gear manufacturing routes.
50+ Swiss-type CNC machines for small-diameter precision parts.
3-, 4- and 5-axis machining centers for complex geometries.
Multi-axis CNC lathes for larger diameter turned parts.
Hobbing, shaping and grinding equipment for precision gears.